When your deck railings have loosened connections, you may need to call us for deck repair in Orland Park, IL. To determine if your railings are at the end of their life, and you need patio repair in Orland Park, IL, you can grab and shake them. The fasteners will come loose and will need to be repaired right away. This could be the result of a loose screw or nail, or it could be the result of wood rot. Check any railings that could pose a safety hazard again to ensure that you, your family, and your guests can enjoy your deck safely. And when you're ready for Orland Park deck repair, we'll be there to help.
Wood Rot
Moisture can wreak havoc on any type of wood, including treated wood. It will not be long before wood rot sets in, and you'll need a patio repair in Orland Park, IL. On forest floors, a microscopic fungus known as wood rot decomposes fallen wood. This is quite normal, even though it cares nothing about who it harms and will eat away at your wooden structures, leading to deck repair in Orland Park, IL. If you want to regularly inspect your deck for wood rot, look for the following signs:
- Splintering, crumbling wood
- Discolored patches in yellow or white
- Soft areas; if you can press a screwdriver into it, you have wood rot
If you've noticed any of these signs, you need a deck wood rot repair. Call us in to take care of it for you when it comes to deck repair in Orland Park, IL.
Pro Tip:
Look under hard-to-reach areas with a flashlight. In general, rot spores appear first in patches that do not receive a lot of sunlight, so inspect the underside for damage, so you can determine whether you need patio repair in Orland Park, IL.
Warping
Just like wood rot, warping is caused by moisture. When the deck boards are harboring more moisture than the surrounding air, the board will shrink itself to match the air's moisture content. When the air is on the dry side, it will also suck the air's moisture into itself to match it. During this process, warping can occur, and you may need deck repair in Orland Park, IL.
If your boards have only recently begun to warp, you may still be able to save them. You can try applying high pressure to the board that is beginning to warp. If the deck boards have already begun to twist, then you'll need to call us in for deck repair in Orland Park, IL. Replacement boards will be necessary for this issue.